“We have two MJ-16’s and we love ‘em. We keep these pumps busy and AIRPLACO is a good company to work with.”
--Joe, Case Foundations (MJ-16 owner)
"I received the clamp this morning along with the spacer and bolt hardware. I am very pleased you and Airplaco/Mesa Industries have followed through with your promise to address this matter. During this national economic crisis that we are all faced with, your action demonstrates that the company recognizes the importance of customer satisfaction. Thanks again for your help, Tom."
--Ken Waine, Wainco Masonry & Stucco (SM-78MD owner)
"We're doing something completely new with the pump. This could revolutionize the industry! We have two pumps and have already pumped 5 tri-axle loads of mortar through one of them so far. The pumps are small enough to do what I need and big enough for alot of the jobs we're doing. We're using the pump to hoist mortar. We pump mortar to the scaffold and our guys use it to lay the block and then fill the cores with it."
--Joe Bonifate, Bonifate Masonry (PG-25 owner)
The Pro-Cretor has done "300 hours of hard work. We are pleased with your machine."
--Igor, НовТехСтрой --through Russian Interpreter--(Pro-Cretor owner)
"The pump does a great job. It does exactly what we need it to do. It meets the specs for pumping distance just like you publish on your brochures. Our guys used it to pump 40 feet horizontal and 50 ft up and it didn't even stutter--just pumped real smooth."
--Boyan, Wolf Masonry (PG-25 owner)
"I am based in Melbourne, Australia, and I know a number of our customers here that have purchased your Block fill pumps and had them shipped here and are currently using them. They have provided very favorable reports as to the quality and ease of use of this product...the 3 reports of the people who have imported and are using them is extremely good."
--Robert Miller, Brunswick Sales (PG-25 Distributor)
“We have now used both (Handy-Grout HG-5 and HG-9) pumps with great success, we can fill 3 times as many frames as we could with our last pump.”
-- Mark Appleyard, Intonhouse PVT LTD (Handy-Grout owner)
"I like the way it is made and I like the way it pumps. The Pro-Cretor is a solid machine. I'm impressed with it."
--Jerry, AEC (Pro-Cretor rental)
“We’re just getting started in the business. We bought the PumpMaster MJ-16 two weeks ago. We’ve already done three jobs. It lifted everything just great!”
-- Gary, Lunmark Company (MJ-16 owner)
The PG-25 has been terrific. We’ve got all kinds of mudjacking jobs lined up and are keeping the pump busy. It holds up great and gets it done quick.”
-- Tom, Gerace Construction (Pg-21 owner)
"The Airplaco PG-25 works real well for us. We're glad to have it as one of our options. We pump at least 5 yds an hour with it."
--Nick Thomas, Thompson Masonry (PG-25 owner)
"We used the SprayMaster for spraying stucco using an elastomeric coat. We had a learning cure but then we got it going. It sprays really good. It kept a continuous spray and put on the material just fine."
-- Aaron Rogers, K2 Contractors (SM-78G owner)
“We pumped three semi trailer loads of material over 10 days with the HGA-50. The pump never went down and we never changed a part.”
-- Doug, Modern Day Concrete (Handy-Grout owner)
“The new HGA-530 has just been great. It saved us a lot of time versus the old way we used to do grouting. I love this thing! I can't say enough good things about it. The clean up time is basically minimal. You can get the mess down to nothing if the job requires it. With the mixer on the pump you can easily adjust the slurry. You can use a high viscosity thick mix for raising a slab or you can use a lighter mix for filling in grout.”
- John Hudek, Diehard Site Utilities (HGA-530 owner)
“Your pump sure makes our life easier grouting these door frames. We used to do this by hand and lay the frames on the ground…what a mess! Your Handy Grout has helped us out a lot.”
- Gene Podell, Lotspeich (HG-9 Owner)
“The HGA-50 runs and pumps very smooth and the machine is heavy duty. We pumped 120 bags in four hours and that was while hand mixing the grout. We had to turn down the pump so we could keep up with it!”
-- Chester, C&R Epoxy Systems (HGA-50 owner)
“Thanks for helping my guys out the other day with some parts they needed. Actually being able to get the right parts for a machine that's a few years old differentiates you from your competition.”
-- Tom Fitzgerald, Able Concrete Correction, Inc. (PG-21 owner)
"We bought a PG-21 and have used it with great success for residential and commercial jobs"
--Jay, Dirigo Slipform (PG-21 owner)
“The Handy-Grout HG-9 is the best thing since sliced bread.”
-- Bob Smyth, Smyth Supply (Handy-Grout owner)
“We used the wireless remote on the PG-21 up to 200 ft and it was still getting the signal. This radio remote makes the job a lot easier when I have control of the pump and the nozzle.”
-- Dave Voelman, Concrete Lifting USA (PG-21 owner)
“I’m a one-man operation and a lot of it has to do with your PumpMaster MJ-16 machine. I can get in and out of the job really quick and do about 3-4 jobs per day. I can get it into places where my competition can’t go. I can move it around easily forward and backwards.”
--Name Withheld (MJ-16 owner)
“We used the PumpMaster for first time today with mix design received from Robbie from your Houston office, worked really well and I am very relieved / happy. I also got my hands on pump hose prima called Slick-Pak 11 which I think helped. We pumped 4m3 in 50 minutes, using 125 foot of line and did not have any problems and the pump stopped and restarted pumping real well.”
-- Greg Kelly, Brickall (PG-21 owner)
“We pumped 22 pallets of material with the Pro-Cretor in about 8 hours. We’re very happy with our machine and the way Tom and Stan worked with us to get it pumping after we ran into some issues with Slick Willie and Silca fumes. We were about to lose the contract in this plant if they hadn’t got us going."
--Greg, SEMAC (Pro-Cretor owner)
“We used the core filling pump at 10,000 ft + elevation & pumped mat'l for a chimney application up 50' with 100' horizontal using 2" hose with ready mix pea gravel delivery in winter weather!”
--Rob Aplin, Aplin Masonry (PG-21 owner)
“The PumpMaster has a very high quality, top notch hydraulic system. This is very well designed. Our machine has been pumping steady for six years. Sometimes we have it pumping for 4 hours straight without turning it off. And it holds up.”
-- Gene, Equity Painting and Slabjacking (PG-21 owner)
“It has been just turnkey for us. The SprayMaster pump gets the job done quickly. We use it for fireproofing and insulation. We set it up on a trailer with a mixer but we can easily move it into a unit because of its compact size. It has been a sweet little machine. We fireproofed some beams and our crew just breezed through it. We’re thinking about buying another pump. One project pretty much paid for our first pump.”
--Kevin Menard, RIFCO (SM-78G owner)
“The HGA-530 has worked beautiful, better than expected as far as the production capabilities. We had to make sure that air-entrainment in the mixer was kept to a minimum and the mixer has measured up great. Two people can operate it instead of using multiple workers to load and mix grout. We have no complaints. The job we’re using it on now, we’re grouting the piling encasements for a new roller coaster.”
--Brett Wilson, Wharton Smith, Inc. (HGA-530 owner)
"Our customer was absolutely excited about how well the SprayMaster pump worked for their job. It just worked marvelously."
--Jack Grant, HALCO (Airplaco Distributor)