Masonry Block Fill
Masonry Wall Grouting
Pea-Gravel Pumping
Mortar Hoisting
Void Filling
Pressure Grouting

Reasons to use a grout pump

Mason contractors can accomplish core filling requirements by using a masonry grout pump. Contractors have several reasons to use a grout pump for grouting masonry walls.

Use a masonry grout pump when barriers on the job prevent a grout delivery system from being lifted into place.

Use a grout pump to fill block walls without a forklift or telehandler.

Using a grout pump is more efficient that bucketing or using grout bags.

Masonry grout pumps are half the cost of a concrete pump...or less.

Masonry grout pumps can be transported on a trailer or in a typical pickup truck.

Contractors can use existing mixers and material silo systems with the masonry grout pump.

Masonry grout pumps also pump materials directly from ready-mix trucks.

arrow
TESTIMONIALS: PUMPMASTER MASONRY GROUT PUMPS
“We used the core filling pump at 10,000 ft + elevation & pumped material for a chimney application up 50' with 100' horizontal using 2" hose with ready mix pea gravel delivery in winter weather!”
--Rob Aplin, Aplin Masonry

(PG-25 Owner)

"We're doing something completely new with the pump. This could revolutionize the industry! We have two pumps and have already pumped 5 tri-axle loads of mortar through one of them so far. The PumpMasters are small enough to do what I need and big enough for alot of the jobs we're doing. We're using the pump to hoist mortar. We pump mortar to the scaffold and our guys use it to lay the block and then fill the cores with it."
--Joe Bonifate, Bonifate Masonry (PG-25 Owner)

"I am based in Melbourne, Australia, and I know a number of our customers here that have purchased your Block fill pumps and had them shipped here and are currently using them. They have provided very favorable reports as to the quality and ease of use of this product...the three reports of the people who have imported and are using them is extremely good."
--Robert Miller, Brunswick Sales (PG-25 Distributor)

MASONRY PUMP ACCESSORIES
arrowred
GROUT HOSES, NOZZLES, CLAMPS
Complete grout material delivery packages are available for the masonry contractor for use with PumpMaster grout pumps. Various size grout hose, block fill nozzles (steel wall hook pipe) and all clamps (heavy-duty or grooved) complete the system. Other accessories, such as grout hose primer and cleanout devices ensure your complete setup.


PUMPMASTER PG-30 DEMO
masonry grout pump videos
arrowred
GROUT PUMPS ON THE JOBSITE
The AIRPLACO PumpMaster PG-30 masonry grout pump is shown in a typical wall grouting jobsite to illustrate the use of a grout pump for masonry contractors. The PG-30 is built specifically for masons who need to fill blocks at the rate of 10 yards per hour and who benefit from the mobility of a compact, self-propelled machine on the construction jobsite.
TESTIMONIALS FROM MASONS
AIRPLACO GROUTING PUMP CUSTOMER TESTIMONIALS
arrowred
CUSTOMERS WHO USE THE PUMPS
Masonry block fill contractors have enjoyed adding AIRPLACO grout pumps to their equipment arsenal! Grout pumps allows contractors to fill block without the need for a skid-steer, forklift or full size concrete pump. These grout pump testimonials are a good insight into the success that contractors have had with the pumps-- directly from the owner!
HOME l GROUT PUMPS l SLABJACK/MUDJACK PUMPS l SHOTCRETE PUMPS l MASONRY BLOCK FILL l PLASTER & STUCCO l HOSE l NOZZLES l VIDEOS l FINANCING l CONTACT