Grout Pumps

Slabjack / Mudjack Pumps
Block Fill Pumps

Plaster / Stucco Sprayer

Concrete / Shotcrete Pumps

Batch Plants
 
Gunite Equipment
 
 

 
 

 
 

 
 
 
 
 
 
 

 
 
SprayMasterTM SM-78E
Stucco, Plaster, Fireproofing, EIFS, Acoustical, Cementitious Coatings
* Powerful rotor / stator design
* Large 60 gallon hopper
* Two bags fireproofing or three-bag stucco mix
* 20-30 bags / hour of fireproofing
* 1500-2000 sq ft / hr of 1/2 in thick stucco
* Pumping distances up to 200 ft
* Easy movement over rough terrain
* Variable speed
* Low hopper height for easy filling
* Removable hopper for easy cleaning
* Remote with speed control / 125 ft cord
* 15 in OD rear wheels / 10 in OD front casters
* Forward and reverse flow control
* Fits through 36 in wide doorway
* Large open hopper throat
* Optional air compressor
* Runs on 10,000 W or greater

 
 
 
Powerful 2L6 rotor / stator design

Variable speed Removable hopper

Applications: Stucco, Plaster, Fireproofing, EIFS, Acoustical, Cementitious coatings

Product sheet (PDF)
SprayMasterTM  SM-78E
Max. Production Capacity 0-10 gal / minute
Material Line Pressure 0 to 500 psi
Air Output 12 cfm @ 90 psi
Material Hopper 60 gal
Rotor / Stator 2L6
Outlet Size 1 1/2 in
Max. Aggregate Size .125 in (3mm)
Power Requirement 5 HP variable, 208/240 V 30A
1 or 3 Phase
Overall Dimensions 33 in W x 72 in L x 43 in H
Hopper Height 32 in
Approx. Weight 585 lb
Controls Manual / Remote
Maximum theoretical performance shown above. Maximum output and pressure cannot be reached simultaneously. Performance will vary depending on power unit, hydraulic rate, mix design and placement line system. Specifications subject to change.
The SprayMasterTM pumps from Airplaco are designed to give an option for the continuous spraying applications including stucco, plaster, fireproofing, EIFS, acoustical and cementitious coatings. Two SprayMaster stucco, plaster, fireproofing, EIFS, acoustical and cementitious coating models are available. The SprayMaster SM-78G includes a gas engine (13 HP) and is suitable for all outdoor spraying applications. The SprayMaster SM-78E includes an electric engine (220 volt 30 Amp single phase) making it the sensible choice for indoor spraying applications. The SM-78E is designed to fit in an elevator for indoor work--this pump is the perfect choice on so many levels. Both models are designed to fit through a 36 inch doorway.


Airplaco SprayMasters feature a 2L6 rotor-stator material cylinder, which allows constant material spray--no intermittent surges to disrupt the flow of the job. Both models have large 60 gallon hoppers for holding stucco, plaster, fireproofing, EIFS, acoustical and cementitious coatings. The SprayMaster hoppers hold two bags of standard fireproofing or three-bag stucco mix. To give an example of the output, the SprayMaster stucco, plaster, fireproofing, EIFS, acoustical and cementitious coatings pumps can output 20 to 30 bags an hour of fireproofing materials. The SprayMaster stucco, plaster, fireproofing, EIFS, acoustical and cementitious coatings pumps can pump distances up to 200 feet. Both SprayMaster models include an open throat hopper to avoid material bridging giving a constant delivery to the rotor-stator. Line pressures are up to 500 psi. Stucco, plaster, fireproofing, EIFS, acoustical and cementitious coating contractors can rely on the SprayMaster for its rugged design and reliable performance. In addition, the SprayMaster is designed for easy cleaning leaving maintenance to a bare minimum.

Available with the SprayMasters are a range of accessories, such as spraying nozzles and hoses for stucco, plaster, fireproofing, EIFS, acoustical and cementitious coatings. Various hose couplings, hose ends and nozzle orifices are available for a complete spraying setup.

Performance is relative to cycle rate, mix characteristics, line size and
distance. Max output, line pressure and distance cannot be achieved
simultaneously. Specifications are subject to change.
 
 
 

© 2003-2006 AIRPLACO. All rights reserved